Bauknecht DDR 5010 Instructions Manual

Bauknecht DDR 5010 Instructions Manual

Advertisement

Quick Links

IMPORTANT SAFETY INSTRUCTIONS

YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT.
This manual and the appliance itself provides important safety messages, to be read and observed at all times.
This is the attention symbol, relevant to safety, warning of potential risks to the user and to others.
All safety warnings are preceded by the attention symbol and the following words:
DANGER:
WARNING:
All the safety messages specify the potential danger/warning to which they refer and indicate how to reduce the risk of injury, damage and electric shock
resulting from incorrect use of the appliance. Carefully observe the following instructions:
Installation must be carried out at least by a specialised technician, in compliance with the manufacturer's instructions and the current local safety
regulations. Do not repair or replace any part of the appliance unless specifically indicated in the user manual.
The specialised technician can determine the appropriate extractor hood exhaust air ducting and fixing. Fixing must be suitable for the weight of the hood
and the load.
The appliances are designed for installation flush with the ceiling.
The appliance must be disconnected from the power supply before carrying out any installation work.
Earthing of the appliance is compulsory. (Not necessary for class II hoods identified by the symbol
The power cable must be long enough for connecting the appliance to the power socket.
Do not pull the power cable to unplug the appliance.
The electrical components must not be accessible to the user after installation.
Do not touch the appliance with wet parts of the body and do not use it when barefoot.
The appliance is not intended for use by people (including children) with limited physical, sensory or mental abilities or without experience or knowledge
of it, unless they are supervised or instructed in its use by someone responsible for their safety.
Do not repair or replace any part of the appliance unless specifically indicated in the manual. Faulty parts must be replaced with original ones. All other
Maintenance services must be carried out by a specialised technician.
Children must be watched over to ensure they do not play with the appliance.
When drilling the wall or ceiling, be careful not to damage electrical connections and/or pipes.
The ventilation ducts must always discharge to the outside.
The exhaust air must not be discharged through a duct used to remove fumes produced by appliances running on gas or other fuels, but must have an
independent outlet. All the national regulations on exhausting air must be observed.
If the hood is used together with other appliances operating on gas or other fuels, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar).
Therefore, make sure the room is adequately ventilated.
The Manufacturer declines any liability for improper use or incorrect setting of the controls.
Regular cleaning and maintenance are essential for correct and efficient operation of the appliance. Frequently clean all encrustations from dirty surfaces to
prevent the accumulation of grease. Regularly remove, clean or change the filters.
Failure to observe the rules for cleaning the hood and cleaning and replacing the filters involves the risk of fire.
The steam extractor hood must never be opened without the grease filters installed and should be constantly watched over.
Gas appliances must have pots on them when used under the extractor hood.
If more than three gas cooking points are used, the hood should work at power level 2 or higher. This will ensure the elimination of excessive heat in the
appliance.
Make sure the lamps are cold before touching them.
Do not use or leave the hood without lamps correctly installed - risk of electric shock.
Wear work gloves for all installation and maintenance operations.
The product is not suitable for outdoor use.
When the hob is in use, the accessible parts of the hood can become hot.
Disposal of electrical appliances
This appliance is manufactured with recyclable or reusable materials. Scrap it in accordance with the local waste disposal regulations. Before scrapping,
make it unusable by cutting off the power cable.
For further information on the treatment, recovery and recycling of this appliance, contact the competent local authority, the household waste collection
service or the shop where you purchased the appliance.
KEEP THESE INSTRUCTIONS
Indicates a hazardous situation which, if not avoided, will cause serious injury.
Indicates a hazardous situation which, if not avoided, could cause serious injury.
on the dataplate).
GB9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DDR 5010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bauknecht DDR 5010

  • Page 1 IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT. This manual and the appliance itself provides important safety messages, to be read and observed at all times. This is the attention symbol, relevant to safety, warning of potential risks to the user and to others. All safety warnings are preceded by the attention symbol and the following words: DANGER: Indicates a hazardous situation which, if not avoided, will cause serious injury.
  • Page 2 INSTALLATION After unpacking the appliance, check for any damage caused during transport. In case of problems, contact the dealer of the After-Sales Service. To avoid any damage, it is advisable to remove the appliance from the polystyrene base only prior to installation. PREPARATION FOR INSTALLATION ATTENTION: very heavy product;...
  • Page 3 ADVICE ON SAFEGUARDING THE ENVIRONMENT Packing disposal The packing materials are 100% recyclable and are marked with the recycling symbol . The various parts of the packing must not be dispersed in the environment, but disposed of in compliance with the local regulations. Product disposal This appliance is marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
  • Page 4 AFTER-SALES SERVICE Before contacting the After-Sales Service: 1. See if you can eliminate the problem on your own by consulting the "Troubleshooting guide". 2. Switch the hood off and then on again to check if the problem has been eliminated. If the following faults occur, contact the After-Sales Service immediately: •...
  • Page 5 MAINTENANCE - Use safety gloves. ATTENTION: - Disconnect the appliance from the mains power supply. GREASE FILTER Captures grease particles released by the cooking process. The grease filter should be cleaned once a month, either by hand or in a dishwasher at a low temperature and on a short cycle.
  • Page 6 MATERIAL SUPPLIED Take all parts out of their packaging and make sure all the listed components are included. • Hood assembled with motor, metal filters and lamps installed. • Remote control • Assembly template • 4 Plugs 10 X 60 mm •...
  • Page 7 INSTALLATION - ASSEMBLY INSTRUCTIONS - Installation or maintenance must be carried out by a qualified technician. ATTENTION: - Very heavy product; hood handling and installation must be carried out by at least two persons. The instructions below, to be carried out in the order in which they are numbered, refer to the figures (with the same step numbers) given on the last pages of this manual.
  • Page 8 DESCRIPTION AND USE OF THE HOOD 1. Hood body 2. Extraction panel 3. Lighting 4. Grease filters 5. LED indicator light 6. Wall mounting. 7. Extraction panel fixing pins 8. Safety sliders 9. Remote control Remote control The remote control must be recognized by the hood through the following procedure: Hood and remote control pairing procedure Press the "◄"...

Table of Contents