FollowMe Tandem Instructions For Use Manual page 36

Danger of falling and injury:
The wheel can come loose if the solid spindle adapters are not correctly tightened.
Regularly check the tightness of the solid spindle adapters, preferably before
every ride.
Now go to section 6.4
6.3 Install the adapter for hub gear
with Klick-Box or rod through the axle
If your bike is equipped with mentioned hub gear, you will need adapter 121'050
(see section 10, accessories and spare parts).
V12/1511
Tighten fi rmly (apply the torque
recommended by the bike manufacturer).
The wheel must be in the middle, i.e. the
distance between the rim and the frame
must be the same on both sides.
The solid spindle adapters also function as
wheel nuts. Therefore regularly check that
the solid spindle adapters are fi rmly tight,
preferably before every ride.
Model for hub gear with Klick-Box system
(for example SRAM).
Model for hub gear with rod through the
axle.
www.family-cycling.com
37