Locating A Disc By Name; List-Up; Radio; Storing Stations Automatically - Sony CDX-MP30 Operating Instructions (English, Español, Français) Operating Instructions Manual

Locating a disc by name

— List-up (For a CD unit with the CUSTOM
FILE function or an MD unit)
You can use this function for discs that have
been assigned custom names*
2
discs* .
1 Locating a disc by its custom name: when you
*
assign a name for a CD (page 14) or an MD.
2 Locating discs by the CD TEXT information:
*
when you play a CD TEXT disc on a CD unit with
the CD TEXT function.
1
Press (LIST) momentarily.
The name assigned to the current disc
appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Turn the SEEK/AMS control dial to play
the disc.
Notes
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file, "NO
NAME" appears in the display.
• If the disc information has not been read by the
unit, "NOT READ" apppears in the display. To
load the disc, first press the number button, then
choose the disc that has not been loaded.
• The information appears only in upper cases.
There are also some letters which cannot be
displayed (during MD playback).
The unit can store up to 6 stations per band
(FM1, FM2, FM3, AM1, and AM2).
1 or for CD TEXT
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
Storing stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals within the selected band, and stores
them in the order of their frequency.
1
2
3
Notes
• If only a few stations can be received due to
• When a number is indicated in the display, the

Radio

Press (SOURCE) repeatedly to select the
radio.
Press (MODE) repeatedly to select the
band.
Press (SENS/BTM) for 2 seconds.
The unit stores stations in the order of their
frequencies on the number buttons. A beep
sounds when the setting is stored.
weak signals, some number buttons will retain
their former settings.
unit starts storing stations from the one currently
displayed.
15