Wickes 223750 Manual page 15

4. TO INSTALL THE BATTERY PACK (SEE FIG. F2)
Slide the fully charged battery pack onto the tool with
sufficient force until it clicks into position.
OPERATION
1. HAND GRIP AREAS
Always ensure you maintain a firm grip whilst operating your jigsaw.
2. LOCK OFF SWITCH (SEE FIG. G)
The lock off switch is used to prevent unintentional
starting. For starting operation of the tool, first depress
the lock-off button and hold it in position, then press the
on/off switch and release it to start operation.
For safety reasons the on/off switch cannot be locked; it
must remain pressed during the entire operation.
3. FINGER PROTECTION
The finger protection is located in front of the blade holder. Whilst working, it will help prevent accidental contact with
moving blade.
4. LED LIGHT
After press the on/off switch to start, the LED light (13) will be on while working. The light will be off when the machine
stops.
Fig. F2
Fig. G
15
1
2