Temperature Control - Kenmore 970-247721 Control Manual

Table of Contents

Advertisement

Available languages

Available languages

TABLE OF CONTENTS

Temperature Control .......................................................... 2

Temperature Setting .................................................... 2
Temperature Mode Change ........................................ 2
Quick Freeze ............................................................... 2
Control Lockout ........................................................... 3
Sabbath Mode ................................................................... 3
Manual Defrost .................................................................. 3
Alarm Functions ................................................................ 3
Temperature Alarm ..................................................... 3
Door Ajar Alarm .......................................................... 3
Power Failure .............................................................. 4
System Errors Alarm ................................................... 4
Alarm Function Table .................................................. 4
TEMpERATURE CONTROL
TEMpERATURE SETTING
The desired temperature inside the freezer can be set us-
ing the UP and DOWN arrow buttons on the control panel,
located on the door of the freezer. Press either the UP or
DOWN arrow buttons to change the temperature setting to
one which suits your needs. The range of settings is -10°F
to 10°F ( -24ºC to -12ºC ) (See Figures 1 and 2).
Figure 1
Figure 2
You may also turn off the freezer by pressing the UP arrow
button until the display reads "10". With the display at
"10', press the Up Arrow button two more times within two
seconds. The display will read "0F".
The freezer can be turned ON by pressing the DOWN
arrow button, with the display -10, two times within two
seconds. Continue by setting the control to the desired
temperature.
The freezer will not cool anything while it is in "0F" position.
The door light will continue to operate while in '0F".
WARNING: The freezer still has electrical power
while in 0F. Disconnect freezer from the outlet before
cleaning or moving it.
TEMpERATURE MODE CHANGE
Temperature display can be changed from ºF to ºC to ºF
by pressing and holding the "Temp Display" button for five
seconds. Press and hold the button again to change it
back to the previous mode.
QUICK FREEZE
Quick Freeze enables the compressor to run continuously
to help cool large quantities of warm (room temperature)
foods faster. Always cool down hot foods to room
temperature before placing them in the freezer. Use this
feature just prior to adding large quantities of unfrozen
foods (not to exceed 3 pounds per cubic foot of freezer
space). For example, do not place more than 45 pounds of
room temperature food into a 15 cubic foot freezer.
To activate the Quick Freeze feature, push the Quick
Freeze button. The control panel will beep once and the
display will now read "-F-" for one second and the Quick
Freeze LED illuminates indicating that the Quick Freeze
cycle has begun. See Figure 4.
2
Figure 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF