Installation And Operation Of Your Refrigerator; Before Starting To Operate Your Refrigerator - Electrolux EJF5442AOX Instruction Booklet

Installation and Operation of your Refrigerator

‡ The operation voltage of your refrigerator is 220-240 V and 50 Hz.
‡ WARNING 7R DYRLG D KD]DUG GXH WR LQVWDELOLW\ RI WKH DSSOLDQFH LW PXVW EH ¿[HG LQ
accordance with the instructions.
‡ A specially grounded plug has been connected to the power cable of your refrigerator.
This plug should be used with a specially grounded socket of 16 amperes. If there is no
such socket in your house, please have it installed by an authorized electrician.
‡ Our company shall not be held responsible for damages that may arise due to utilization
with no grounding installation.
‡ Place your refrigerator in a suitable spot that it will not be exposed
to direct sunlight.
‡ It should be at least 50 cm away from heat sources such as
cookers, ovens, wing radiators and stoves and at least 5 cm away
from electrical ovens.
‡ Your refrigerator should not be used in the open air and should not
remain under the rain.
‡ If your refrigerator is juxtaposed with a deep freeze, it is necessary
to leave a space of at least 2 cm between them in order to prevent
condensation on the outer surfaces.
‡ Please do not place any heavy objects on your refrigerator and
place your refrigerator in a suitable spot in such a way that there
will be a free space of minimum 15 cm on the top.
‡ If your are going to place the refrigerator beside your kitchen
cabinets then you should keep a clearance of at least 2 cm's
between them.
‡ To prevent the condenser (the black backside component with
¿QV IURP WRXFKLQJ WKH ZDOO SXW RQ WKH SODVWLF GLVWDQFH JXLGH LQ LWV
place rotating 90°.
‡ To ensure smooth and vibration-free operation of your refrigerator,
the adjustable front feet must be set at the suitable height and
mutually balanced. You can ensure this by turning the adjustable
feet clockwise (or counter-clockwise). This process should be
performed before the food is placed in the refrigerator.
‡ Before using your refrigerator, wipe all its parts with warm water in which you shall add
one teaspoon of food soda, then rinse it with clean water and dry it. After the cleaning
process is completed, place all the parts back.

Before Starting to Operate Your Refrigerator

‡ 'XULQJ WKH ¿UVW RSHUDWLRQ RU WR HQVXUH WKH HI¿FLHQW RSHUDWLRQ RI WKH
device following the relocation processes, allow your refrigerator
to remain idle for 3 hours (in a vertical position), then insert the
plug to the socket. Otherwise, you may damage the compressor.
‡ 7KH ¿UVW WLPH \RX RSHUDWH \RXU UHIULJHUDWRU DQ RGRU PLJKW EH VPHOW 7KLV RGRU VKDOO
disappear once your refrigerator starts cooling.
UK - 4 -