Cisco Linksys WVC54GCA User Manual page 256

Installation
To manually enter a WEP key, leave the Passphrase field blank, click Next, and enter the
WEP key on the next screen . This WEP key must match the WEP key of your wireless
network . For 64-bit WEP encryption, enter exactly 10 hexadecimal characters . For 128-bit
WEP encryption, enter exactly 26 hexadecimal characters . Valid hexadecimal characters
are "0" to "9" and "A" to "F" . After you have entered the WEP key, click Next .
O.
Review the Camera's settings . To make
changes to the settings, click Back
to go back to the previous screen . If
the settings are correct, click Save to
continue .
P.
When the Wizard informs you that the new Camera settings have been saved, click
Continue .
Q.
Disconnect the power from the Camera .
Click Next .
R.
Disconnect the network cable from the
Camera and from your switch or router .
Click Next .
6