Specification - DeVilbiss T-AFPV Operation Manual

Noise Levels
Spraying solvent
MISUES:
・ A ll spray guns project particles at high velocity and must never be aimed t any part of body.
・ N ever exceed the recommended safe working pressure for any of the equipment used.
・ T he fitting of non-recommended or non-original accessories or spare parts may create hazardous
conditions.
・ B efore dismantling the equipment for cleaning or maintenance, all pressures, air and material, must be
isolated and released.
Disposal of non-metallic materials must be carried out in an approved manner. Burning may
generate
toxic fumes. The removal of waste solvents and coating materials should be carried out by an
authorized local waste disposal service.

SPECIFICATION

Max. Air Pressure:
Max. Fluid Pressure:
Cylinder Air Pressure:
Air Consumption;
Weight:
Mounting Stud:
Fluid Tube:
CYL Air Tube:
CAP Air Tube:
FAN Air Tube:
The continuous A-weighted
sound pressure level of this
spray gun may exceed
85dB(A) depending on the air
cap/nozzle set-up being
used. Sound levels are
measured using an impulse
sound level meter and
analyzer, when the gun is
being used in a normal
spraying application. Details
of actual noise levels
produced by the various air
cap/nozzle set-ups are
available on request.
Pressured air/fluid passage
may be broken when
cleaning or flashing with
solvent.
The solvent may be harmful
if contacted with eyes.
0.9Mpa (9 bar)
1.4Mpa (14 bar)
Min. 0.34Mpa (3.4 bar)
Max. 0.49Mpa (4.9 bar)
70L/min. (Gun Inlet pressure 0.15Mpa)
265g (Gun Body)
Dia. 19mm x 51mm
6 x 4mm
6 x 4mm
6 x 4mm
6 x 4mm
Wear earplugs when using the spray gun.
Always wear eye protection when spraying or
cleaning the equipment.
− 3 −