Other Operations; Using The Control For Hdmi Function For "Bravia" Sync - Sony BDV-HZ970W Operating Instructions Manual

Other Operations

Using the Control for
HDMI Function for
"BRAVIA" Sync
This function is available on TVs with the
"BRAVIA" Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified as
below:
– System Power Off (page 51)
– One-Touch Play (page 51)
– Routing Control (page 51)
– Theater Mode (page 51)
– System Audio Control (page 51)
– Volume Limit (page 52)
– Audio Return Channel (page 52)
– Remote Easy Control (page 52)
– Language Follow (page 52)
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will not work
when you connect this system to a component
which is not compatible with the Control for
HDMI function.
There are convenient buttons on the system's
remote for operating the TV, such as
THEATER, ONE-TOUCH PLAY, and AV ?/1.
For details, see "Remote control" (page 14) and
refer to the operating instructions of the TV.
ONE-TOUCH
THEATER
PLAY
BRAVIA Sync
STB
50
US
AV
TV BD
Note
• Depending on the connected component, the Control
for HDMI function may not work. Refer to the
operating instructions supplied with the component.
• The Control for HDMI function may not work if you
connect other than a Sony component, even if the
component is compatible with the Control for HDMI
function.
Preparing for the Control for
HDMI function
(Control for HDMI - Easy Setting)
If your TV or other component is compatible
with the Control for HDMI - Easy Setting
function, you can set the system's or other
components' [Control for HDMI] function
automatically by setting the TV. For details,
refer to the operating instructions of the TV or
other components.
If the TV is not compatible with the Control for
HDMI - Easy Setting function, set the Control
for HDMI function of the system, TV, and other
components manually.
Note
• For details on setting the TV, refer to the operating
instructions of the TV.
1
Make sure that the system and the TV
are connected with an HDMI cable.
2
Turn on the TV and other components
connected via the HDMI connection,
and press [/1 to turn on the system.
3
Set the Control for HDMI function of the
TV.
The Control for HDMI functions for the
system, TV, and other components are
simultaneously set to on.
To set the [Control for HDMI]
function of the system to on/off
manually
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select [Setup].