Step 2: Easy Setup; Connecting To The Network - Sony BDP-S780 Operating Instructions Manual

Step 2: Easy Setup

When turned on for the first time
Wait for a short while before the player
turns on and starts "Easy Setup."
1
Insert two Size AA (R6) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment.
2
Plug the player into the AC outlet.
3
Press [/1 to turn on the player.
4
Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
5
Perform "Easy Setup."
Follow the on-screen instructions to
make the basic settings using </M/m/
, and ENTER on the remote.
14
to AC outlet
</M/m/,
ENTER
Connecting to the
Network
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the player.
LAN cable
(not supplied)
Broadband ADSL modem/
router Cable modem
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select "Network Settings," "Internet
Settings," then "Wired Setup" (page 31), and
follow the on-screen instructions to complete
the setup.
USB Wireless Setup
Turn off the player, then connect the USB
Wireless LAN Adapter (UWA-BR100 only
available as of November 2010) to the USB
jack on the front or rear of the player.
b
The USB Wireless LAN Adapter may not be
available in some regions/countries.
LAN cable
(not supplied)
Wireless LAN ADSL modem/
router Cable modem
Internet
USB Wireless
LAN Adapter
Internet