Table of Contents
Advertisement
General
Rada products are precision-engineered and should give continued superior and safe
performance, provided:
1.
They are installed, commissioned, operated and maintained in accordance with
our recommendations, and
2.
Periodic attention is given as necessary to maintain the product in good functional
order. Guidelines for frequency are given below.
Rada Service Engineers/Agents will call by prior arrangement, if required. Service
Contracts may be undertaken, subject to survey - details upon request.
Preventative/Precautionary Maintenance
(Planned Maintenance Programmes)
The frequency and extent of attention required will vary according to prevailing site
and operational conditions.
Six-monthly
Visual: check internal component condition. Inspect for debris, scale deposition,
deformation, damage, corrosion, etc. Maintain or renew as necessary.
Maintenance Procedures
Maintenance must be carried out in accordance with these instructions, and
must be conducted by designated, qualified and competent personnel.
External surfaces may be wiped clean with a soft cloth, and if necessary, a mild
washing-up type detergent or soap solution can be used.
WARNING! Many household and industrial cleaning products contain mild
abrasives and chemical concentrates, and should not be used on this product.
Components are precision made, so care must be taken whilst servicing to avoid
damage.
When ordering spare parts, please state the product type, i.e. Rada Pulse, and
identify the part name and number (refer to the PARTS LIST).
prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 55
MAINTENANCE
10
Advertisement
Table of Contents
