Table of Contents
Advertisement
6. Equivalent Isotropically Radiated Power (EIRP)
6.1. EIRP LIMITS
Table 6-2– Factory Transmit Power Settings for FCC, IC and ETSI
2.5 dBi Integral Antenna
Notes for Table 6-2:
1. The Model Number of any instrument may be found on the identification name plate located on the outside
of the OneWireless Adapter.
2. TX Power is set by the Honeywell factory producing the OneWireless Adapter. The factory set value for
TX power is determined by the customer's model number selections in the Model Selection Guide in Table
II for Country Code and is consistent with the values shown in
changed in the field away from the Model Number listed on the instrument's nameplate, then the TX
power setting should likewise be changed per the table above to match the new Country selection. See
Setting TX
Power.
3. The TX Power Setting values given in and
within the RF Module. These TX Power Setting values do not include antenna gain. When this external
gain is included, then using the TX power values in
will not exceed the maximum EIRP limits that are given in
12
TX Power Setting
Description
Table 6-2
OneWireless Adapter Professional Installation Guide
TX Power Setting for
3
for ETSI
(dBm)
9
6-2. If the Country location is
Table
represent the power produced by the Radio circuit
Table 6-2
ensures that the OneWireless Adapter EIRP
Table
6-1.
3
FCC/IC
(dBm)
14
Revision 1
May 2011
Advertisement
Table of Contents
