GE G7CDAASSPSS Owner's Manual page 5

Table of Contents

Advertisement

Available languages

Available languages

Using the Glass Carafe Drip Coffee Maker
Before Use
unit / accessories.
• Clean the main unit / accessories when you have not used for a long
time.
How to Use
pour into water reservoir at the back of the unit. The stepped water
level indicator can be easily viewed inside unit.
IMPORTANT: Before brewing, always check to make sure water level
line.
NOTE:
amount of water placed into the water reservoir; as much as 10% is
2. Place empty carafe on the warming plate.
to suit your taste.
room-temperature water (20-25°C), and then close the top lid.
temperature water (20-25°C), and then close the top lid.
After power on, press "BREW/CANCEL" key once, the indicator
illuminates in white, the relay functions, at that time, the heating element
Brew icon will appear on the LCD display.
Press "BREW/CANCEL" once, the relay disconnects, the white indicator
After boiling away the water in the water tank, the thermostat functions
and the appliance enters into the keep-warm mode, after keeping warm
standby mode.
display shows 12:00 AM (":" does not blink). The appliance enters into
the clock-setting mode. Press "HR" and "MIN" keys to set the current
time. If there is not any operation within 15 seconds, the current time
into the standby mode.
Set the clock
A. Shortly press "HR" key once, one hour can be changed. Hold and
press "HR" key, the "hour" can be increased continuously.
B. Shortly press "MIN" key once, one minute can be changed. Hold and
press "MIN" key, the "minute" can be increased continuously.
C. After setting the time, press "BREW/CANCEL", "Auto Brew" or "Bold"
When the appliance is under the standby mode, hold and press "HR" or
"MIN" key for more than 3 seconds to enter into the clock setting mode.
49-9000004 Rev. 0
Function selection:
the thermostat functions and the appliance enters into the keep-warm
mode is selected.
once, the white indicator turns on, the appliance starts to brew strong
functions and the appliance enters into the keep-warm mode. The
bold function can only select in the standby mode or the Auto-Brew
mode.
mode. Once clean mode is activated, the heater will turn on. "Clean"
function: When the appliance has worked for 80 cycles cumulatively,
key for more than 3 seconds in any status, the white indicator turns
on, and the cleaning program is started, the heating elements works
until the water in the water tank is boiled away. Then the appliance
will enter into the standby mode. The "Cleaning" shown in the LCD
D. Under the keep-warm condition, press "BREW/CANCEL" key to
cancel the keep-warm function, at that time, the LCD display shows
the current time and the appliance enters into the standby mode.
"Auto Brew" function
A. Press "Auto Brew" key, the LCD display shows "Auto Brew on" and
"AM 1:00", then set the auto-brew time by following the operation
display shows "Auto Brew on", and the auto-brew time stops blinking,
then the appliance enters into the auto-brew mode, after 5 seconds,
the appliance goes back to the main interface, at that time, the LCD
display shows "Auto Brew on" and current time, which means the
B. Press "Bold" key, the LCD display shows "Auto Brew on", "Bold" and
the current time, which means the "Auto Brew" function for "Bold
C. When the auto-brew time is reached, the white indicator of "BREW/
D. Can press "Auto Brew" key to cancel the auto-brew function when
the appliance works under the auto-brew mode. After the auto-brew
cycle.
NOTE: To interrupt the brewing process at any time, press the BREW
button; then remove plug from wall outlet.
and enter sleep mode after two hours.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G7cdabsspss

Table of Contents