B&K Reference 50 Owner's Manual page 67

Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This
is very useful if you are using speakers that can't handle the maximum power output from your processor or if you
simply wish to limit the volume that can be achieved using normal front panel or remote operation.
WARNING - If you set this level too low, the processor may appear broken (no sound).
From Remote
1 À(UP) or §(DOWN)
2 ¶ •
(LEFT) or (RIGHT)
Set the Zone ID for Zone A - Each message transmitted from your remote includes a Product ID Code Set (See
Zone ID), which allows independent command and control of the processor's Zones A and B. Set the desired
zone ID number for use with Zone A (default 1). You may not set the Zone A zone ID to the same setting as Zone
B (default 2) or vice versa If you need to set Zone A to the current Zone B setting then you must first set Zone B
to some other Zone ID value.
WARNING - if you change the Zone product ID code set in the processor without making the
corresponding change to the remote then the remote will no longer appear to work. Refer to the separate
remote manual for details on changing the remote's product ID code set ("device code").
From Remote
1 À(UP) or §(DOWN)
¶ •
2
(LEFT) or (RIGHT)
Set Zone 1 (A) On Screen display usage - During normal operation, when you make a change to a system
setting or your processor detects a change to the incoming audio or video, a message is overlaid along the
bottom of your video screen. You can turn off the overlay display from this menu. This will not affect the on-screen
displays when you enter the menu system.
ADVANCED ZONE A SETTINGS
1 Max Level 1 Max Level
2 Zone ID
3 On Screen Display
4 V1 Output
5 Surround Modes
6 Favorite Recall use
next item adjust
MENU advanced setup
ZA ZONE ID
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
ADVANCED ZONE A SETTINGS
1 Max Level
2 Zone ID
2 Zone ID
3 On Screen Display
4 V1 Output
5 Surround Modes
6 Favorite Recall use
next item adjust
MENU advanced setup
ZA ZONE ID
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
63
+15 dB +15 dB
1
User
Tape
Auto
ENTER
1
Action
move to Max Level
adjust level to desired value
+15 dB
1
1
User
Tape
Auto
ENTER
1
Action
move to Zone ID
adjust Zone 1 (A) ID to desired value