Table of Contents
Advertisement
Enabling the Wireless LAN function
In order to enable the AIBO
wireless LAN function, turn the wireless switch on its body
to ON.
If the AIBO robot is still operating, first press the pause
button to put the AIBO robot in Pause mode.
1
Hold the AIBO robot firmly, turn it upside
down, and open the cover.
Notes
Caution
•
When lifting the AIBO robot, always hold it by its body, and not
its extremities. (Those with small hands may have difficulty
handling the AIBO robot.)
•
Do not touch the charging terminal on the AIBO robot's stomach
with your bare hands. Touching the contacts will reduce contact
quality.
®
Entertainment Robot's
2
Slide the wireless switch to ON, and close the
cover.
Caution
Simply turning ON the switch will not make the wireless LAN
function usable. Refer to the next page for instructions on how to
set up the network.
7
Advertisement
Table of Contents
