Charmglow 4 Burner Gas Grill Grill Owner's Manual page 30

Step 14
Attach the side burner assembly to
the right side of the grill body.
Insert four M6 X 10mm bolts
(silver) into both right legs halfway.
Place side burner assembly over
bolts and slide toward front of grill,
then tighten securely. Fasten side
burner front panel to grill body with
one M6 X 10mm bolt (silver).
Step 15
Attach the hose heat shield to the
right cart assembly by using two
M4 X 8mm bolts (silver).
Step 16
Remove two bolts and washers
from the side burner valve. Insert
the side burner valve assembly
through the hole in the side burner
front panel, then firmly seat the
valve nozzle into the burner
venturi. Hold in place while you
perform Step 17.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
29
Side
Burner
Valve
Valve
Nozzle
Hose Heat Shield
Burner Venturi