Sony TA-SA300WR Service Manual page 4

TA-SA300WR
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C935, C936, C941
and C951 on the POWER board) to discharge the capacitors (C935, C936, C941 and C951 on the POWER board).
– POWER Board (Conductor Side) –
C935 (US and Canadian models)
C936 (Except US and Canadian models)
CABLE SETTING
Note 1: Fit the cable so as not near
the heat sink (AMP) into the
hook of the chassis.
Note 2: Fix the cable so as not near
the heat sink (AMP).
4
C951
800 /2 W
800 /2 W
C941
800 /2 W
heat sink (AMP)
Note 3: Fix the cable so as not near the
converter transformer (T901).
converter transformer
(T901)