Brinkmann CHARCOAL SMOKER CHARCOAL GRILL Owner's Manual page 28

Step 5
Attach rear panel to cart assembly by
using four M6 X 15mm bolts. After
rear panel is attached, secure tank
block bar to the rear panel using one
M5 X 10mm bolt and M5 nut. Secure
the bottom of the tank block bar to the
cart base with one M5 X 10mm bolt.
Step 6
Attach door frame bracket to front of
cart assembly by using four
M6 X 15mm bolts.
Step 7
Install a door handle stand to the door
using two M4 X 10mm bolts,
and M4 nuts. Next insert door handle
into handle stand. Place the other
handle stand over handle and attach by
using two M4 X 10mm bolts and two
M4 nuts. Repeat for other door
27