External Output - Fujitsu AUXG09KVLA Design & Technical Manual

8-2. External output

Use an external output cable with appropriate external dimension, depending on the number of ca-
bles to be installed.
• A twisted pair cable (22AWG) should be used. Maximum length of cable is 25 m.
• Output voltage: High DC 12 V ± 2 V, Low 0 V.
• Permissible current: 50 mA
• For details, refer to
 When indicator, etc. are connected directly
Example: Function setting 60 is set to "00"
 When connecting with a device equipped with a power supply
Example: Function setting 60 is set to "00"
8-2. External output
"Combination of external input and output"
Resistor
LED
Connected unit
Connected device
(Operation status)
Connected unit
on page 35.
Relay
- 34 -
PCB
+
1
CN47
-
2
PCB
+
1
CN47
-
2
8. External input and output