Feature Procedures; Going Off-Hook; Raising Or Lowering Receive Volume - AT&T Definity Callmaster II User And Installation Instructions Manual

Voice terminals
Hide thumbs Also See for Definity Callmaster II:
Table of Contents

Advertisement

Feature Procedures

The following features can be used immediately. The procedures in this
section give short, step-by-step instructions for using each of these
features. For your convenience, beginning with the Conference feature,
the features are listed alphabetically.

GOING OFF-HOOK

When the headset or handset is plugged into the terminal, it is
immediately off-hook.

RAISING OR LOWERING RECEIVE VOLUME

You can use the Volume control button to raise and lower the receive
level volume under the following conditions:
The CALLMASTER voice terminal is off-hook, and the headset(s) is
plugged in.
The voice terminal is not off-hook on an external speakerphone call.
No call is ringing.
You are not in the midst of selecting a personalized ringing pattern.
To raise or lower the receive volume
To raise the volume of the receive level of the headset or the
handset, press the right half of the volume control button
labeled
To lower the receive level of the headset or the handset, press the
left half of the volume control button labeled
There are eight possible volume settings. Each press of the
NOTE:
volume control button raises or lowers the volume one incremental level.
As you raise or lower the headset volume level, the display reflects your
choice, such as:
Headset L > > > >
On the display, one arrow is the lowest setting, and eight arrows is the
highest setting.
For procedures to raise and lower the ringer volume on your
NOTE:
CALLMASTER set, see the procedures for the Select Ring feature later
in this section.
;
H
17
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Definity callmaster iiiDefinity callmaster iii

Table of Contents