Troubleshooting - Lucent Technologies Definity 8434DX User Manual

Problem
A feature doesn't work
as noted in this guide.
There are no feature
access codes written in
the appropriate blanks
in this guide.
Problem
There's no dial tone.

Troubleshooting

1
Reread the procedure and try again.
2
For many features you must lift the handset before
you can use the feature.
3
Check with your system manager to be sure this
feature is administered on your voice terminal.
4
You may have an older version of System 85 software
so some features may work differently from the
procedures described in this guide.
See your system manager for a list of feature access
codes for features assigned to your voice terminal.
Then, write the codes in this guide.
1
Check with your system manager to be sure your
voice terminal is administered correctly.
2
Make sure the handset and line cords at your voice
terminal are securely connected at both ends.
3
Press Test . If the green light next to
on or flashes rather than goes on steadily, the voice
terminal is not communicating with the DEFINITY
switch or with System 85.
4
Find a working voice terminal of the same type as
your own. Unplug this voice terminal from its modular
wall jack. Plug your voice terminal into that jack and
check if it gets dial tone.
5
If your voice terminal still does not work, plug the
working voice terminal (of the same type) into your
modular wall jack. If the working voice terminal has
dial tone, your own voice terminal is faulty. See your
system manager.
Solution
Solution
Test does not go
44