Lucent Technologies Definity 8434DX User Manual page 35

To select a personalized
ringing pattern (for those
8434DX voice terminals
which have a
Ring
button)
To adjust ringer volume
if necessary (handset and
speaker are not active, or
the handset and ringer
are both active)
1
While on-hook, press
Red light next to
Current ringing pattern plays and repeats every
three seconds.
The display shows the ringing pattern you are
hearing, such as:
SELECT RING PATTERN: 1
2
Cycle through the ringing patterns by pressing (and
then releasing)
Red light next to
The display shows the number of the ringing
pattern you have selected
Note: You can also press
cycle through all eight ringing patterns
3
If you want to save the ringing pattern currently
being played, don't press
the selected ringing pattern two more times, and then
it will be automatically saved.
You hear confirmation tone (two rising tones)
Red light next to goes
Note: If you receive a call, go off-hook, or lose power
during selection, the process is interrupted and you
must start again.
1
To raise the volume, press the right half of the
Volume control button labeled
to lower the volume, press the left half of the
Volume control button labeled
Ring
winks
Ring
Ring
continues to wink
Ring
or
Next
anymore. You will hear
Ring
Ring off
) to
Prev
;
33