Automatic Callback - Lucent Technologies Definity 8434DX User Manual

To program an
Abbreviated Dialing (AD)
button
To see the number stored
on an Abbreviated Dialing
(AD) button
To place a call using an
Abbreviated Dialing (AD)
button

Automatic Callback

To automatically place
another call to an
extension that was
frequently busy
1
While off-hook, press
softkey below Prog
or Press
Program
or Dial the Abbreviated Dialing Program
access code __________ (while off-hook)
2
Press the selected
3
Dial the outside number, extension, or feature access
code you want to store
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark, or Wait
into the telephone numbers programmed on the
AD button.
4
Press
AD xxxxx
5
Hang up or press
1
While on-hook, press the selected
Stored number is shown
2
Press to return to the normal display or repeat
Exit
Step 1 to see another number
1
While off-hook, press the selected
Call is automatically dialed
1
Press and then press the softkey below
Menu
AutCB before or during call attempt
or Press
Auto Callback
attempt
or Dial the Automatic Callback access code before
the call attempt __________
2
Hang up (within seven seconds) or press
You will get a 3-burst priority ring when both your
voice terminal and the called extension are idle
Menu and then press the
(while off-hook)
[confirmation tone]
AD xxxxx
again [confirmation tone]
to end programming
Drop
AD xxxxx
AD xxxxx
before or during the call
[dial or confirmation tone].
[ringback tone]
[dial tone]
Drop
18