Download Print this page
Fimco Volt Edge Instruction Manual

Fimco Volt Edge Instruction Manual

Advertisement

Quick Links

INSTRUCTION MANUAL
Wireless Remote
(5164291)
Important safety instructions for Volt Edge Wireless Remote.
Save these instructions: This manual contains important safety instructions for Volt Edge wireless remote.
This remote is only compatible with Volt Edge products.
Warning: Shock hazard. Do not allow any liquid to get inside remote.
Button Identification
The small LED at the top of remote turns red when transmitting.
The red LED is also the pairing button.
The 'ON' button will only turn on the Volt Edge Receiver.
The 'OFF' button will only turn off the Volt Edge Receiver.
Pairing Procedure:
1.
Ensure the receiver power cord is not connected.
2.
Install a charged battery pack into the receiver.
3.
Power ON the Volt Edge receiver. Within 15 seconds press and hold the pairing button for 5 seconds. The green LED on the receiver will
quickly turn off and back on when pairing is successful.
4.
Power OFF the Volt Edge receiver.
5.
Power ON the Volt Edge receiver and press the OFF and then ON button to confirm pairing is successful.
Storage Recommendations:
The best storage place is one that is cool and dry, away from direct sunlight and excess heat, cold or moisture.
Remote Capabilities:
The remote can control the receiver up to 50 feet away. Obstructions
and radio interference can reduce the effective distance.
A remote can be paired to multiple receivers at a time.
A receiver can only be paired to one remote at a time.
Retain a copy of receipt for your Fimco Product.
As it will be required to validate any warranty service.
Volt Edge products are warranted against manufac-
turer or workmanship defects for One (1) year from
date of purchase for home owner usage and 90 days
for commercial usage.
TROUBLESHOOTING
Problem
Possible Cause
Remote battery
Replace the battery with
is discharged
CR2032 size button cell battery
Receiver
The green light must be illuminated on the
Remote
is not on
receiver for the remote to control it
does not
Remote is not
control the
Follow the Pairing Instructions to pair a
paired with
receiver
remote and receiver
receiver
Radio
Move the receiver and remote away from
Interference
the electronic interference
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
[5195302
Possible Solution
(09/19)]
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Volt Edge and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fimco Volt Edge

  • Page 1 Install a charged battery pack into the receiver. Power ON the Volt Edge receiver. Within 15 seconds press and hold the pairing button for 5 seconds. The green LED on the receiver will quickly turn off and back on when pairing is successful.
  • Page 2 WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY. If the conditions set forth above are fulfilled and the Equipment or any part thereof is found to be defective, Fimco shall, at its own cost, and at its option, either repair or replace the defective Equipment or part. Fimco will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.

This manual is also suitable for:

5164291