Siemens QSA2700D Basic Documentation page 16

Configurations
4
Modbus configuration (QSA2700D)
16 | 26
Siemens
Step Description
1 From page 3 , long press the push button (2...10
s) to enter page 5
3 Long press the push button (>2 s) to enter page
6 :
Note: A short press returns to page 3.
4 Short press the push button to select "Configure
via Climatix" or "Reset Modbus settings" on page
6 .
Note: Ensure that the device is properly
connected to a Climatix
programmed with the plug&play feature.
4.1 When "Configure via Climatix" is selected; long
press the push button (5...10 s) to activate the
function.
When "Reset Modbus Settings" is selected; long
4.2
press the push button (> 10 s) to activate the
function.
Picture
Page 3
Page 5
controller that is pre-
TM
Page 6
Page 6
Page 6
A6V11160936_en--_a
2017-12-01