MindWare Aqua Maze Instructions

STEP-BY-STEP BUILDING GUIDE

STEP-BY-STEP BUILDING GUIDE

SET-UP

SET-UP
Put together specific pieces.
Construct the water dumper.
Snap together
the water wheel
pieces.
Make sure the spinners are
facing the correct direction
for maximum spin.

STEP 2

STEP 2
Construct the central base tower.
Construct a double tower off one arm
of the triple chute using a curved
track, straight track, funnel,
and 15 tubes. Add on a
second arm of the
triple chute with the
water dumper
and 5 tubes.
Water
Dumper

STEP 4

STEP 4
Connect the left side and central base.
Connect the left and right
sides of the build using a
spinner slide. Add a water
wheel, funnel, and 3 tubes.
Spinner
Slide
Tip

TIP

Connect
tall bases.
Look for arrows (
to know which end is the closed end of the building piece.

STEP 1

STEP 1
Construct the central base.
Connect 3 tubes under each arm
of the triple chute and 2 tubes and
a marble catcher in the middle.
Inflate the mat –
be careful not to
over-inflate so
that the bottom
stays flat.

STEP 3

STEP 3
Construct the left side.
Begin constructing the left side
of your Aqua Maze using the
Funnel
whirlpool vortex, marble
catcher, a tall base,
curved track, 2 straight
tracks and 7 tubes.
Straight
Track
Curved
Track

STEP 5

STEP 5
Construct the right
base and tower.
Use a tall base,
Funnel
curved track,
spinner slide,
and 21 tubes
to add on to
Water
the remaining
Wheel
arm of the
triple chute.
, ) throughout the instructions
Marble Catcher
Whirlpool
Vortex
Tall
Base
Marble
Catcher
Triple
Chute
Spinner
Slide
Curved
Track
Tall
Base