Using The Appliance - Philips S3000 Series Manual

Charging with charging stand (S3332, S3333 only)
Quick charge

Using the appliance

3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Connect the small plug of the cord into the
charging stand. Connect the supply unit into
any 100V to 240V outlet. Use only the power
cord provided.
2 Place the shaver in the stand in an upright
position making sure charging contacts in the
bottom of stand fit into recess in bottom of the
shaver.
- The display on the shaver will indicate the
shaver is charging.
3 After charging, remove the shaver from the
stand by lifting straight up. Do not tilt the
shaver.
When you start charging the empty battery, the
charging light flashes white quickly. After approx. 5
minutes the charging light flashes white slowly. The
shaver now contains enough energy for a
5-minute shave.
Note: This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning under
the tap. For safety reasons, this appliance can
therefore only be used without cord.
13
English