Milwaukee M12 DE Original Instructions Manual page 14

TECHNICAL DATA
Dust extractor
Production code
Drilling capacity max.
Drilling depth
No-load speed
Battery voltage
Weight according EPTA-Procedure 01/2003
(Li-lon 1,5 Ah / Li-lon 3,0 Ah)
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.
SAFETY INSTRUCTIONS
This appliance can be used by children
GB
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and know-
ledge if they have been given supervision or
instruction concerning use of the appliance
in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
Additional Safety and Working Instructions
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is recom-
mended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
Do not use the dust extractor for drilling work in wood, steel or
plastic.
Do not use machines on any material containing asbestos.
Remove the battery pack before starting any work on the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
English
10
WARNING! To reduce the risk of re, personal injury, and product
M12 DE
damage due to a short circuit, never immerse your tool, battery
pack or charger in uid or al-low a uid to ow inside them.
4405 01 03...
Corrosive or conductive uids, such as seawater, certain industrial
... 000001-999999 chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
16 mm
Use only System M18 chargers for charging System M18 battery
120 mm
packs. Do not use battery packs from other systems.
0-22000 min
-1
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
12 V
1,6 kg/1,8 kg
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition Every six
months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or
by burning them. Milwaukee Distributors o er to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it o immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legisla-
tion requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
The user can transport the batteries by road without further
requirements.
Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries:
Ensure that battery contact terminals are protected and insulated
to prevent short circuit. Ensure that battery pack is secured against
movement within packaging. Do not transport batteries that are
cracked or leak. Check with forwarding company for further advice