Advertisement
Quick Links
4 INPUT
VIDEO SWITCH
CONVERTER
and
Installation Instructions:
For a TV without color-coded
A/V inputs:
1. Connect a coax cable from the
output of your cable box/wall jack
or antenna to the "ANT IN" input
on the MOD-41.
2. Connect a standard color-coded
A/V (or S-Video) cable from a video
component to the "Input 1" on the
rear of the MOD-41.
You can connect up to 4
components this way.
3. Connect a coax cable from the
MOD-41 "TO TV" output to the coax
input of your TV.
4. Set the "Channel 3-4" switch to
the channel you would like to view
your programming on.
5. Plug the MOD-41 into an
electrical outlet.
For a TV with color-coded
A/V inputs:
1. See step 1 from above.
2. Connect a standard color-coded
A/V or (S-Video) cable from a video
component to the "Input 1" on the
rear of the MOD-41.
3. Connect the color-coded A/V
(or S-Video) cables from the
MOD-41 "Output" to the color-
coded A/V inputs of your TV.
4. Plug the MOD-41 into an
electrical outlet.
5. Change your TV input mode
to VIDEO.
Cut carefully along dotted line with scissors.
SPECIFICATIONS:
RF Output Channels:
Video Carrier Output Level:
Impedance:
Video Input Impedance:
Audio Input Impedance:
How to use the MOD-41:
1. Press the button on the front of
the MOD-41 to select the video
source you would like to view.
2. Turn the video source on.
Typical Install
IN
OUT
OR
Cable Box
A/V cable hook up
VIDEO AUDIO
L
R
Satellite
Game
audio
video
audio
video
to TV
ANT.in
L
ch.
R
S
S
3
4
output
input1
OR
AUDIO
75 ohm
L
R
TV
3 or 4
69dB uV
75 ohms
75 ohms
13 + - 3 K ohms
Antenna
S-Video hook up
AUDIO S-VIDEO
OR
L
R
DVD
VCR,
,
,
Camcorder
,
(Connect up to four
components to MOD-41)
audio
video
audio
video
AC
S
S
input2
input3
TERK MOD-41
Advertisement
