Page 2
CONTENT OF BOXES QUANTITY DESCRIPTION DRAWING Wall panels Door frame Roof timbers Quantity will vary Roof panels depending on size Quantity will vary Roof boards depending on size Quantity will vary Roof trims depending on size Center piece Cupula If you ordered. Floor panels Depending on size Hardware: Bolts and...
Page 3
ASSEMBLY INSTRUCTIONS All Pavilions are completely erected in the shop prior to crating for shipping. All hardware is included. All parts are fully sanded, routered, notched, drilled and numbered for ease of reassembly. The parts that go together have the same numbers/letters written next to the predrilled holes they attach to.
Page 4
STEP 3: Attach the door frame to the wall panels with deck screws 3” x #8. Patio pavilions Kits www.foreverredwood.com...
Page 5
STEP 4: Attach the timbers together to form the base of the roof with bolts (3 ½” x 5/16)), washers & nuts. (Match up the numbers to attach the two parts together). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten.
Page 6
STEP 5: Attach the Roof panel to roof base and center piece with bolts, washers & nuts. (Match up the numbers to attach the two parts together). Tap the bolt all the way into the wood to set it. Then add a washer and nut and lightly tighten.
Page 7
STEP 6: The roof panels are tongue and groove, but are not waterproof on their own. To waterproof the roof, once the roof is fully installed and bolted in, please add properly installed roofing felt paper (add roof tar) and metal flashing around the joints prior to adding the boards to the roof.
Need help?
Do you have a question about the PATIO PAVILION KITS and is the answer not in the manual?
Questions and answers