Table of Contents
Advertisement
Input & Communication
•
Controls and monitors keypad (Button module)
•
Controls and monitors status lights
•
Stores Macro files, Input files, Lens files, 3D files and Light Sensor Calibration file (LSC)
Virtual comport (RS232 serial communication)
The USB-IN port of the communication interface supports RS232 serial communication. You can use the
RS232 input port to connect a local PC to your Thor projector. This way you can configure and control your
Thor projector from your local PC via RS232 (serial) communication protocol.
Do not forget to set the projector's baud rate (default = 115200) to match that of the computer.
Advantages of using RS232 serial communication:
•
easy adjustment of the projector via PC (or MAC).
•
wide range of control possibilities.
•
copying data from the projector (backup).
RS232
An Electronic Industries Association (EIA) serial digital interface standard specifying the
characteristics of the communication path between two devices using either D-SUB 9 pins or D-
SUB 25 pins connectors. This standard is used for relatively short-range communications and does
not specify balanced control lines. RS-232 is a serial control standard with a set number of
conductors, data rate, word length and type of connector to be used. The standard specifies
component connection standards with regard to computer interface. It is also called RS-232-C,
which is the third version of the RS-232 standard, and is functionally identical to the CCITT V.24
standard. Logical '0' is > + 3V, Logical '1' is < - 3V. The range between -3V and +3V is the transition
zone.
36
R5906787 /04
Thor series
Advertisement
Table of Contents
