Haier HW80-B14979 User Manual page 26

10-Installation
10-4
S1
S2
10-5
I1
10-6
Note: Keep in safe place
Keep the transportation bolts in a safe place for later use. Whenever the appliance is to
be moved at fi rst reinstall the bolts.
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re-
moved before installation to prevent damage:
10-7
26
2. Remove the 10 screws (R1 - R10) from lower back
reinforcement. take out reinforcements (S1 and
S2) from the machine.*HW100/120-B14979
R5-R10
Remove the 4 screws (R1 - R4) from lower back
reinforcement. take out reinforcements (S2) from
the machine.*HW80-B14979 (Fig. 10-4).
R1-R4
3. Pull out the 2 iron bars I1 and I2 (Fig. 10-5)
I2
4. Fill the 6 left holes with blanking plugs (Fig. 10-6).
10.5 Aligning the appliance
Adjust all feet (Fig. 10-7) to achieve a complete
level position. This will minimize vibrations and thus
noise during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment. Floor
should be as stable and fl at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
EN