Auto Answer; Auto Retry; Location; Tty - Snapper CDM-8915 User Manual

SETTINGS

AUTO ANSWER

To answer calls when your Snapper is connected to an optional
hands-free car kit or headset:
1
Press [MENU]
2
Select one of the following options then
press [OK].
Off / 5 Secs / 10 Secs / 18 Secs
This function will not be active when you select "Ringtone off".
Except "Ringtone off", Auto Answer shall be active in any other case.
More specifically,
C
• If headset is connected, Auto Answer will be active.
H
• If headset is not connected and flip is closed, Auto Answer will
4
not be active.
• If headset is not connected and flip is open, Auto Answer will
be active except "Ringtone Off" mode.

AUTO RETRY

Automatically redial a call up to 5 times after a set time interval.
1
Press [MENU]
2
Select a retry time option (Off, 3 Secs, 5 Secs,
7 Secs, 10 Secs). The Repeat Category will
appear when a time frame is chosen.
3
Under Repeat, select a time interval option
(1 Time, 3 Times, 5 Times).
When Redial Time is set to "Off", the "Repeat" field disappears.
4
To save, press
.
.
[OK].
84
SETTINGS

LOCATION

Your cellular telephone is equipped with a Location feature for use in
connection with location-based services that may be available in the
future. The Location feature allows the network to detect your
position. Turning Location off will hide your location from everyone
except 911.
1
Press [MENU]
2
Select either "911 only" or "Location on" with
the Navigation Key then press

TTY

A TTY (also known as a TDD or Text Telephone), is a
telecommunications device that allows people who are deaf or hard
of hearing, or who have speech or language disabilities, to
communicate via telephone.
Your Snapper is compatible with select TTY devices. Please check
with the manufacturer of your TTY device to ensure that it supports
digital wireless transmission. Your Snapper and TTY device will
connect via special cable that plugs into your phone's headset jack.
If this cable was not provided with your TTY device, contact your TTY
device manufacturer to purchase the connector cable.
1
Press [MENU]
2
Select either "Enable TTY" or "Disable TTY"
with the Navigation Key then press
85
.
[OK].
C
H
4
.
[OK].