Call Waiting Function; Adjusting Volume; Silencer - Snapper CDM-8915 User Manual

BASIC FUNCTIONS

CALL WAITING FUNCTION

Notifies you of an incoming call when you are already on a call by
sounding a beep tone and displaying the caller's phone number.
1
To answer another call while on the phone,
C
press . This places the first call on hold.
H
To switch back to the first caller, press
2
again.
Call Waiting is a system dependent feature. Please contact your
service provider for details.

ADJUSTING VOLUME

Adjusts the volume of the ringtone, voice call, key beep and speaker.
1
Press [MENU]
of the following.
l
Ringtones : Controls the ringtone volume.
l
Key tone : Controls the key pad tone.
l
Voice call : Controls the earpiece volume.
l
Speaker Phone: Controls the speaker volume.
2
Adjust volume then press
To adjust earpiece volume during a call, press the Navigation
Key up or down. Or side volume key up or down.
then select one
[OK] to save it.
24
BASIC FUNCTIONS

SILENCER

Mutes key tones and activates the vibration mode to alert you of an
incoming call or message.
1
To turn Silencer mode on/off, press and hold
will be displayed to indicate Silencer mode
is active.
25
.
C
H
2