RM-11
Disassembly
Step-by-Step Disassembly Instructions (Model 3205)
10. Open the snaps on both sides of the Display shield
and remove the shield.
Note: Be careful not to damage the shield.
12. Remove the UI board from the LCD frame.
Note: Be careful not to damage the LCD frame.
Power Key removal.
Page 4
11. Remove the LCD Module by holding the UI module
in one hand while loosening the LCD frame a little at
the same time at one side. Press the LCD module gently
from the same side you are loosening until the LCD
Module detaches.
Note: Be careful not to damage the sensitive parts. Do
not press the LCD Module too hard.
13. Remove the Power Key.
14. Lift the Vibra to remove it.
©2005 Nokia Corporation
CC Technical Documentation
Confidential
Issue 2 09/2005