Creating Ppp Connection Entry; Figure 23 Set The Baud Rate - Murata Cat-M1/Nb-Iot User Manual
Lte evk
Table of Contents
7. Click 'Change settings'. In the Modem tab, change baud rate to 115200.
8. Click 'OK' twice on the modem window to complete the setup.
8.2 Creating PPP connection entry
1. Go to 'Control Panel' and type in 'dial-up' in the search bar.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2018
Type 1SC EVK User Guide, v1.3, 5/4/2020
Figure 23 Set the Baud Rate
Page 23 of 44
www.murata.com
- Quick Links:
- At/Ppp Port
- At Commands
Hide quick links:
Table of Contents
Need help?
Do you have a question about the Cat-M1/NB-IoT and is the answer not in the manual?