Siemens SINAMICS G130 Operating Instructions Manual page 15

1. Cut out a 141.5 mm x 197.5 mm section in the cabinet door.
2. Fit the AOP30 operator panel in this cutout section from the outside.
3. Hook the tensioning elements into the openings provided.
4. Tighten the screws by hand to secure the tensioning elements.
The AOP30 operator panel
Operating Instructions, 03/2012, A5E00331451A
CAUTION
Make sure that the screws for the tensioning elements are not too tight
otherwise the operator panel housing may be damaged.
Mechanical installation
13