Acer V70MA User Manual page 17

5. Plug the fan cable to the fan connector to its corresponding
connector on the system board.
onboard connectors and their functions.
8 IDE Hard Disk Sup port
The board comes with an enhanced PCI IDE controller that supports
PIO mode 4 and Ultra DMA (Direct Memory Access) mode data
transfers. In addition, two PCI IDE interfaces are mounted on the riser
card to enable the system to support a maximum of four IDE hard
disks, or any other IDE devices. See Figure 2 for the location of the
IDE interfaces.
Connect the cables according to the IDE hard disk configuration in
Table 5. Follow the instructions in the housing installation manual on
how to install a hard disk in the system.
Table 5 IDE Hard Disk Configuration
IDE Connector
IDE 1 (CN11)
IDE2 (CN10)
V70MA System Board
See Table 2 for the list of
Master Slave
Hard disk 0 Hard disk 1
Hard disk 2/ IDE Hard disk 3
CD-ROM drive
17