Starting The Program; Starting Options For Pclocals Service Software - Nokia NME-2A Series Tuning Instructions

P.A.M.S.
Technical Documentation

Starting The Program

The program is delivered on a diskette and is copy protected with a
dongle. The program can also be installed on the hard disk, which is
recommendable to obtain a maximum data access rate. In case you want
to store the program to the hard disk, proceed according to instructions
given in PCLocals installation manual.
The program is started with the command:
NME2SERV Enter (or PCLSTART Enter )
The program can be set up work with different serial ports or display
types.

Starting options for PCLocals service software

The program is started by entering the following command:
NME2SERV
For more information about how to operate the PCLocals software, refer
to booklet PCLocals Software Instructions.
Issue 2 05/2000
NME–2A
Tuning Instructions
Page 9