Selmo SMART 43 Manual

Selmo
Electronic control for towel radiators
'SMART 43 ' is an electronic control for
towel radiators.
There are ten different types of available
resistances: from 100W to 1000W.

Operational modes:

Continuous-Heating, Stand-by,
Boost, Timer12, Timer24.
• "Continuous-Heating": the electronic
control activates the heating element and
remains active until the user decides to set
the device in "Stand-by" mode. The maximum
temperature of work is 43°C
• "Boost" mode: the thermostat feeds the
heating element at the maximal power for
two hours. At the end of the two hours, the
control goes back into the "Stand-by"
mode. The temperature of work is 43°C
• "Timer12" and "Timer 24" mode: the
electronic control activates the "Boost"
function for two hours. At the end of the two
hours the control enters into "Stand-by"
mode for either 10 or 22 hours (the user
has the possibility to preset it), after which
the thermostat repeats the function "Boost"
for two hours. This sequence is repeated
cyclically.
• "Stand-by" mode: by activating this
function, the device goes in stand-by, the
heating element is deactivated.
SMART 43 is a certified product:
SMART 43 complies to the following directives:
-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).
-EN 60335-1:2012+A11:2014
-EN 60335-2-43:2003+A1:2006+A2:2008
-EN 61000-3-2:2014 -EN61000-3-3:2013 -EN 62233:2008
-EN 55014-1:2006+A1:2009+A2:2011 -EN 55014-2:1997+A1:2001+A2:2008
Selmo
Electronic
Vi i a Pacinotti, 24 - 35030 Rubano
"SMART 43 "
(PD) Italy- Tel +39 049.8976761,
Comfort technology division
Available colours: - White
Rev. 4 October 2015
Fax +39 049.8976085
- Chromed
EN
- www.selmo.it