Figure 4.1: Blueflash Processor Stopped - CSR BlueCore Casira User Manual

12. Save the file. Click
indicates the upload status during the backup. Do not interrupt this process as doing so may corrupt the
data.
13. Wait for the upload to complete. The backup is complete when the file name displays
files will be created: one with .xpv extension, the other with .xdv extension. Both files are required to
restore the firmware (.xpv contains the firmware program space; .xdv contains the data space).
14. Repeat steps if required. Repeat Steps 1-13 of this section for additional Casira units.
15. If your Casira fails to operate properly due to erroneous PS Key modifications or failed firmware
updates, perform a recovery to restore the original firmware and settings with which the Casira was
shipped.
bc01-an-100Pd
. BlueFlash saves the backup into the specified location. The status bar
Save

Figure 4.1: BlueFlash Processor Stopped

© Copyright Cambridge Silicon Radio Limited 2001-2004
This material is subject to CSR's non-disclosure agreement.
Initial Steps
. Two
complete
Page 10 of 33