Floating Snout Cone Setup - Patriot equipment Snout Cone Manual

Floating Snout Cone Setup Diagram
A
John Deere Clamp/Mount Assembly is shown
DETAIL A
Pivot Bolt
Top half can flex by itself
as well or in conjuction with
the arm
Pivot Bolt
Placing bolts in these locations allow
for pivoting as well as a rest/stop
when Snout Cones are not being flexed.
Bolt location can vary with implement.
Bolts must be tight enough to allow for pivot points to move.
Minden Machine Shop Inc.
1302 K Road Minden, NE
800-264-6587 / 308-832-0220
Snout Cone V2.1 17