Motorola MG8702 Quick Start Manual page 10

WiFi Setup using the Configuration
Manager if you want to keep your current
network name and password and for some
reason you can't use the App.
We
strongly suggest that you do this by using the
MotoManage App mentioned above. If that's not possible,
please continue below.
Please note that if your previous network name was 5 or less
characters or the wireless password was 7 or less characters,
you cannot change the Motorola password to match your
previous network.
If possible, connect a computer with Ethernet to any of your
modem/router's Ethernet ports. You can also do this
configuration using WiFi by using your smartphone or another
WiFi device that has a Web browser.
If you need to do this WiFi setup by using your
smartphone or other WiFi device, first connect your WiFi
device to your new modem/router using the wireless
network name (SSID) and password printed on the
modem/router's bottom label. (You don't need an
Internet connection to do this.)
1 Now write down the wireless network name and password
for your original network. Most WiFi devices work on
either the 2.4 GHz band, or both the 2.4 GHz and the 5
GHz band. You may have a wireless network name and
password for just the 2.4 GHz band; or you may have a
wireless network name and password for both the 2.4 GHz
and 5 GHz bands.
2 If you haven't already logged into the Configuration
Manager, follow the steps in the section above labeled
Configuration Manager to do so.
9