Advertisement
Quick Links
> Installation guide
You just bought the
Flat projector colour OR white
from the SeaMAID range. Thank you for your trust.
Follow this guide and the online video for an easy and quick installation.
FLAT PROJECTOR
TO BE SCREWED ON A 1,5' VACUUM
FITTING
References White 501160 and 501177
References RGB 501184 and 501191
Advertisement
Related Manuals for Seamaid 501160
Summary of Contents for Seamaid 501160
- Page 1 > Installation guide You just bought the Flat projector colour OR white from the SeaMAID range. Thank you for your trust. Follow this guide and the online video for an easy and quick installation. FLAT PROJECTOR TO BE SCREWED ON A 1,5‘ VACUUM...
- Page 2 > Presentation of the product This 12V flat LED lighting system can be installed in all types of pools, with or without a liner, by screwing it on a 1’’1/2 vacuum fitting. 1,5’ Adapter PVC conduit Adapter Junction Cover Projector vacuum Cable F2’’/F50...
- Page 3 > Installation A step by step assistance Recommendations Before any installation, it is important to provide a 1’’1/2 vacuum fitting compatible with the screwing method. Be sure that the wall inlet corresponds to the type of pool structure and does not leak.
- Page 4 (2)till complete blockage supply from the safety isolating transformer. Replace the front cover by screwing the 3 screws Screw the SeaMAID adapter (3) at the back of the in the U shaped support. wall inlet (2), diameter 50mm Check the cover stays free of movement with...
- Page 5 > Use RGB 501184 model, 16 programs with remote controller Manual program including 11 static colours and 5 controlled atmospheres with the provided remote controller. > The use of the remote controller requires a positioning face to the lamp at a maximum distance of 10 meters, unfolded antenna.
- Page 6 > Remote controller RGB 501184 model Buttons functions : For the first remote controller use, it is necessary to pair it with the O > Off/On projector S > Synchronization C > Colour selection Insert the provided battery in the remote controller; press each P >...
- Page 7 > Use RGB 501191 model, 16 On/Off programs Manual program including 11 static colours and 5 controlled atmospheres The RGB flat projector On/Off control is manual, using the on/off switch of the projector power. A cut of the current of less than 2 seconds makes the program change. After a cut of the current for over 10 seconds, switch on restarts from the last program Recommendations : used.
- Page 8 > Use WH 501139 model, 3 intensities with remote controller Manual program including 3 controlled intensity levels with the provided remote controller. > The use of the remote controller requires a positioning face to the lamp at a maximum distance of 10 meters, unfolded antenna.
-
Page 9: Remote Controller
> Remote controller WH 501139 model Buttons functions : For the first remote controller use, it is necessary to pair it with the projector O > Off/On S > Synchronization Insert the provided battery in the remote controller; press each C >... - Page 10 > Accessories Find here the compatible and recommended accessories SeaMAID low voltage radio switch: To control 1 to 12 lamps, choose between the 1 and 4 channel module to install on the ~12V projector(s) power supply Recommendations : Discover the...
- Page 11 > SeaMAID, proof of quality and reliability > Quality: SeaMAID products are developed exclusively by our French R&D team then manufactured in China and marketed after a rigorous quality-control. SeaMAID products range is certified TÜV Rheinland thus proving the safety and quality of the proposed products.
Need help?
Do you have a question about the 501160 and is the answer not in the manual?
Questions and answers