Using Yamaha Xgstudio Player - Asus CUW-RM User Manual

6. SOFTWARE REFERENCE

6.4 Using Yamaha XGstudio Player

To start the Yamaha XGstudio, click Start, point to Programs, point to YAMAHA
XGstudio, and then click XGstudio Player.
6.4.1 Yamaha XGstudio Player Control Panel
Closes the player. NOTE: You can also close
the player by pressing <Alt>+<F4>.
Minimizes the player to an icon.
Displays the Set Play List dialog box where
you can create a list of songs to play auto-
matically. NOTE: You can also display the
Set Play List dialog box by pressing
<Ctrl>+<O>.
Loads and plays the MIDO file currently se-
lected in Play List. When all the songs in the
Play List have finished, playing stops auto-
matically and the song at the beginning of
the list is designated as the current-play song.
Pauses the playing of a song. Click this but-
ton again or click to resume playing.
Stops the playing of a song and returns the
start-play location to the beginning of the
song.
Designates the first song in the Play List as
the new current-play song.
Designates the song just before the currently
playing song as the new current-play song.
For detailed instructions and references to software and utilities, use the pro-
grams' online help and electronic documentations.
Designates the song after the song currently
playing as the new current-play song.
Designates the last song in the Play List as
the new current-play song.
Displays the control panel for the Soft Syn-
thesizer features.
Speeds up the tempo of the song being played.
Slows down the tempo of the song being
played.
NOTE: The tempo is reset to 0 for each new
song.
Displays the Set Sound Source dialog box.
Displays Help. NOTE: You can also display
Help by pressing <F1>.
Increases/decreases the volume level of the
song being played by dragging the slider up/
down.
ASUS CUW-RM User's Manual 109