Advertisement
Install the Car Kit and Turn on the Device
To turn on the device, turn on the main power switch at the back of device, then press the
Sleep Mode Button (
Main power switch
To install the car kit:
1. Attach the cradle to the gooseneck (1).
2. Attached the cupula to the windshield
inside your car (3).
3. Press the lever (4) to secure the
cupula on the windshield surface.
Note: Rise the lever (2) to release the cupula from the windshield.
4. Adjust the angle of the gooseneck and secure it by fastening screwcap A.
5. Adjust the angle of the cradle and secure it by fastening screwcap B.
6. Carefully place and slide the device into the cradle (5).
4
) on the top of the device.
Note:
- When the main power switch is set to Off, the device is not able to be charged.
- If you press the Sleep Mode button when the device is on, it enters into sleep
mode.
- When the device is on, it takes longer time for the battery to be fully charged.
When the device is in sleep mode, the battery can be fully charged quickly.
Sleep Mode
Button
screwcap A
screwcap B
Advertisement
