Command List (8/8) - Sony BRC-X400 Command List

Command List (8/8)

Number in ( ) is MENU display values.
Command Set
PRESET RESET
SET
RECALL
SPEED
*1
MODE
CALL MODE
*1
PTZ TRACE REC
PLAY
DELETE
SYSTEM VIDEO FORMAT Select
IR RECEIVE
H PHASE
IMG FLIP
COLOR BAR
CAMERA ID
MENU ON/OFF
ENTER
OSD
IR CUT FILTER ICR
AUTO ICR
*1
TALLY ON/OFF
LEVEL
HDMI COLOR SPACE
POWER ON/STANDBY
STANDBY MODE -
*1
Only available for BRC-X400/X401.
*2
When the value is large, even if the subject is bright, the camera cannot be changed to Day mode. In this case, use the camera by
decreasing the value.
*3
Aligned to the right end when IMAGE FLIP is Off, and aligned to the left end when IMAGE FLIP is On.
Command
Reset 8x 01 04 3F 00 pp FF
Set 8x 01 04 3F 01 pp FF
Recall 8x 01 04 3F 02 pp FF
Select 8x 01 7E 04 1B 0p FF
Separate 8x 01 7E 01 0B pp qq FF
Common 8x 01 7E 04 1C 0p 0p FF
- 8x 01 7E 04 3D pp FF
- 8x 01 7E 04 3B 0p FF
Start 8x 01 7E 04 20 00 0p 02 FF p: 0 to F (PTZ Trace number to record 1 to 16)
Stop 8x 01 7E 04 20 00 00 03 FF
Prepare 8x 01 7E 04 20 01 0p 01
FF
Start 8x 01 7E 04 20 01 00 02 FF
- 8x 01 7E 04 20 02 0p 00 FF p: 0 to F (PTZ Trace number to delete 1 to 16)
8x 01 7E 04 32 0p 0p FF
- 8x 01 06 08 pp FF
*1
Up 8x 01 7E 01 3E 00 02 FF
Down 8x 01 7E 01 3E 00 03 FF
Direct 8x 01 7E 01 5B 00 0p 0p
0p FF
- 8x 01 04 66 0p FF
*1
Color Bar 8x 01 04 7D 0p FF
Overlay 8x 01 7E 04 77 0p FF
Name
- 8x 01 04 22 0p 0p 0p 0p
FF
- 8x 01 06 06 pp FF
- 8x 01 7E 01 02 00 01 FF
- 8x 01 7E 04 76 0p 0q FF
On/Off 8x 01 04 01 0p FF
On/Off 8x 01 04 51 0p FF
Threshold 8x 01 04 21 00 00 0p 0p
FF
- 8x 01 7E 01 0A 00 0p FF
- 8x 01 7E 01 0A 01 0p FF
- 8x 01 7E 01 03 00 0p FF
- 8x 01 04 00 0p FF
8x 01 7E 04 50 0p FF
Command Packet
pp: PRESET No. to reset - 1 (00 - 63)
pp: PRESET No. to set - 1 (00 - 63)
pp: PRESET No. to recall - 1 (00 - 63)
p: 0=Compatible (specify the speed with
the same command as Separate for VISCA,
and with an argument of the Preset Recall
command for CGI), 1=Separate (operation
with individual speed by a preset),
2=common (operation with common speed
to all presets)
pp: PRESET No. -1 (00 - 63)
qq: Positioning speed (01 - 19)
pp: Common Speed (01-19)
pp: 00=MODE1, 01=MODE2, 10=TRACE
Refer to the section on PRESET MODE
settings and PRESET command behaviors.
p: 2=Freeze (Freeze the image from a
camera during recalling), 3=Normal
p: 0 to F (PTZ Trace number to reproduce 1
to 16)
pp: Video Format
For pp, refer to the section of the Video
output method (video format) of VISCA
Command Setting Values
pp: 02=On, 03=Off, 10=Toggle
ppp: Phase difference adjusted value (000 -
3BF)
p: 2=On, 3=Off
p: 2=Color Bar On, 3=Color Bar Off
p: 2=Overlay Name On, 3=Overlay Name Off
pppp: Camera ID (0000 - FFFF)
p: 2=On, 3=Off, 10=Toggle
p: 0=SDI, 1=HDMI
q: 2=OSD On, 3=OSD Off
p: 2=On (Night), 3=Off (Day)
p: 2=Auto ICR On, 3=Auto ICR Off
pp: 00 - FF (Threshold)
p: 2=On, 3=Off
p: 0=OFF, 4=ON (LOW), 5=ON (HIGH)
p: 0=YCbCr, 1=RGB
p: 2=On, 3=Standby
p: 2=Side (When transferring to Standby,
move the Pan to the end point
Tilt to 0°), 3=Neutral
21
Comments
*2
*3
and the