Wireless Remote Controller - Fujitsu AS G09LTCB Series Design & Technical Manual

2.

WIRELESS REMOTE CONTROLLER

FEATURES
„ „
Simple function setting
z „
Setting of the air conditioner selection function is performed by remote controller.
Built-in timers
z „
Select from Three different timer programs (Weekly / Program / Sleep).
Weekly timer
z „
Weekly timer can be easily set by wireless remote controller.
ON, OFF can be set up to 4 times in 1 day and up to 28 times in 1 week.
Program timer
z „
The program timer operates the on and off timer once within a 24 hour period.
Sleep timer
z „
The sleep timer function automatically corrects the temperature thermostat setting according to
the timer setting to prevent excessive cooling and heating while sleeping.
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
Timer setting
60min.
1 °C
Switching remote controller signal code
z „
Mixed-up
I.U. I.U. I.U. I.U.
Code selector switch eliminates unit
•
„
being wrongly switched.
(Up to 4 codes can be set.)
*I.U.=Indoor unit
3 mode timer setup available
 „
(Weekly / Program / Sleep).
Easy operation.
 „
Easy to change signal code (max. 4 units) by button operation.
 „
2 °C
After code change
A B C D
I.U. I.U. I.U. I.U.
A B C D
- (01 - 04) -
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The set
temperature can drop to a maximum of 4 °C.
1 °C
2 °C
30min.
60min.
90min.
Timer setting
3 °C
4 °C