Asus VE276Q Series User Manual

Asus VE276Q Series User Manual

Lcd
Hide thumbs Also See for VE276Q Series:

Advertisement

VE276Q/VK276Q Series

LCD Monitor

User Guide

E5829 V1
April 2010
VE276Q
VK276Q

Advertisement

Table of Contents
loading

Summary of Contents for Asus VE276Q Series

  • Page 1: Lcd Monitor

    VE276Q/VK276Q Series LCD Monitor User Guide E5829 V1 April 2010 VE276Q VK276Q...
  • Page 2: Table Of Contents

    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
  • Page 3: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will...
  • Page 4: Safety Information

    Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard.
  • Page 5: Care & Cleaning

    Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • The screen may flicker during the initial use due to the nature of the fluorescent light.
  • Page 6 Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
  • Page 7: Welcome

    Welcome! Thank you for purchasing the ASUS The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VE276Q/VK276Q Series brings you! Package contents Check your VE276Q/VK276Q Series LCD package for the following items: LCD monitor Monitor base 1 x CD Quick start guide 1 x Power cord 1 x VGA cable 1 x WebCam USB cable (Only available for model VK276Q) 1 x DVI cable 1 x Audio cable If any of the above items is damaged or missing, contact your retailer immediately. ASUS LCD Monitor VE276Q/VK276Q Series ® VE276Q/VK276Q Series LCD monitor!
  • Page 8: Assembling The Monitor Base

    Assembling the monitor base To assemble the monitor base: Attach the base to the arm and fix with the screw to join them tightly. You can easily tighten the screw by fingers. Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Make sure to screw the base to the arm tightly. Connect cables To connect cables: Connect the cables you need based on chapter 1.5.2, page1-5. Chapter 1: Product Introduction...
  • Page 9: Monitor Introduction

    Both the DVI and HDMI input source should not be selected as both the Main and PIP source simultaneously. Button: • Press this button to decrease the value of the function selected or move to the next fuction. • This is also a hotkey for Volume adjustment. MENU Button: • Press this button to enter the OSD menu. • Press this button to enter/select the icon (function) highlighted while the OSD is activated. ASUS LCD Monitor VE276Q/VK276Q Series...
  • Page 10 Button: • Press this button to increase the value of the function selected or move right/up to the next function. • This is also a hotkey for Brightness adjustment. Input Select Button: • Use this hotkey to switch from VGA, DVI, HDMI and DisplayPort input signal. Press after you connect HDMI cable with the monitor. Power Button/Power Indicator: • Press this button to turn the monitor on/off. • The color definition of the power indicator is as the below table. Status Blue Amber...
  • Page 11: Rear Of The Lcd Monitor

    1.5.2 Rear of the LCD monitor AC-IN port DisplayPort HDMI-IN port DVI port VGA port Audio Line-in port Earphone-out port USB-IN port (Only available for model VK276Q) ASUS LCD Monitor VE276Q/VK276Q Series Screw Holes for VESA Wall Mount Rear connectors...
  • Page 12: Detaching The Arm/Stand(For Vesa Wall Mount)

    Detaching the arm/stand (for VESA wall mount) The detachable stand of the VE276Q/VK276Q Series LCD monitor is specially designed for VESA wall mount. To detach the arm/stand: Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. Use a screwdriver to remove the two screws that secure the stand to the monitor. Detach the stand from the monitor.
  • Page 13: Adjusting The Monitor

    • Hold the stand to prevent the monitor from falling while changing its angle. • Y ou can adjust the monitor’s angle from -5˚ to 20˚. Install LifeFrame 2 software ASUS VK276Q series provides the easy-to-use LifeFrame 2 software that can work with the webcam, allowing users to create their own photos or video clips. • T he LifeFrame 2 software currently supports Microsoft XP Service Pack 2 operating systems. • T he LifeFrame 2 software is bundled in the support CD.
  • Page 14: Osd (On-Screen Display) Menu

    OSD (On-Screen Display) menu 3.1.1 How to reconfigure VE276 Splendid Color Image Sound PIP Settings Input Select System Setup Press the MENU button to activate the OSD menu. Press  and  to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press  and  again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button.
  • Page 15 : The adjusting range is from 0 to 100. : Contains three preset color modes (Cool, Normal, Warm) • Color Temp. and one User Mode. • Skin Tone : Contains three color modes including Reddish, Natural, and Yellowish. In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100. ASUS LCD Monitor VE276Q/VK276Q Series : This is the best choice for playing dark-scene game or Brightness Contrast Saturation Color Temp Skin Tone Move Menu User Mode Exit...
  • Page 16 Image You can adjust the image Sharpness, Trace Free, Aspect Control, Position (VGA only), and Focus (VGA only) from this main function. • Sharpness to 100. • Trace Free adjusting range is from lower 0 to faster 100. • Aspect Control Scan” (Only available for HDMI input). • ASCR : Select YES or NO to enable or disable dynamic contrast ratio function. • Position : Adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input). : Reduces Horizonal-line noise and Vertical-line noise of the image • Focus by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input). Sound Adjusts the sound settings to your preference. VE276 Splendid Sharpness Color...
  • Page 17 Right-Top, Left-Top, Right-Bottom, or Left-Bottom. • SWAP : Swaps the source of the main and sub-window. Both the DVI and HDMI input sources should not be selected each for the Main and PIP source simultaneously. Sub-Channel HDMI DisplayPort ASUS LCD Monitor VE276Q/VK276Q Series PIP Mode PIP Source Size Position Swap Move Menu Main-Channel HDMI DisplayPort •...
  • Page 18 Input Select Select the input source from VGA, DVI, HDMI, or DisplayPort. System Setup Adjusts the system configuration. • Splendid Demo Mode function. • AI Light : Automatically adjust the screen backlight according to the surroundings. The monitor backlight will turn brighter in a bright surroundings, or turn darker in a dark surroundings. As the light sensor is located on the top of the monitor, do not block the sensing area. • OSD Setup (V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD screen. • Information •...
  • Page 19: Specifications

    HDMI input DVI input D-Sub input DisplayPort input Audio Line-in Power ON Consumption Tilt VESA Wall Mounting Phys. Dimension (WxHxD) Box Dimension (WxHxD) Net Weight (Esti.) Gross Weight (Esti.) Voltage Rating *Specifications are subject to change without notice. ASUS LCD Monitor VE276Q/VK276Q Series VE276Q 27.0”W (68.6cm) 1920x1080 ≧300cd/㎡ ≧1000:1 ≧160°(V) ; ≧170°(H) 16.7 M(6bit Hi FRC) 2ms (Gray to Gray) 3W x 2 stereo DVI with HDCP -5° ~ +20° Yes (100mm x 100mm) Yes (100mm x 100mm) 643x445.6x220 732x560x176 7.2 kg...
  • Page 20: Troubleshooting (Faq)

    Troubleshooting (FAQ) Problem Power LED is not ON The power LED lights amber and there is no screen image Screen image is too light or dark Screen image is not centered or sized properly Screen image bounces or a wave pattern is present in the image Screen image has color defects (white does not look white) Screen image is blurry or fuzzy...
  • Page 21: Supported Timing List

    Input Mode Aspect Ratio 640x350, 70Hz 640x350, 85Hz 720x400, 70Hz 720x400, 85Hz MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs) Input Mode Aspect Ratio 640x480, 67Hz SVGA 832x624, 75Hz ASUS LCD Monitor VE276Q/VK276Q Series Resolution H(KHz) 31.469 37.861 37.5 43.269 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 68.677 67.5 63.981...
  • Page 22 VESA Modes, User Available Timing Input Mode Aspect Ratio 16:9 720P 16:9 16:9 16:10 WXGA 16:10 16:10 16:10 WSXGA+ 16:10 WSXGA+ 1080P 16:9 HDMI Supported Primary Timing VESA Modes, Factory Preset Timing Input Mode Aspect Ratio 480i 16:9 480P 16:9 576i 16:9 576P...
  • Page 23 ASUS LCD Monitor VE276Q/VK276Q Series 3-10...

This manual is also suitable for:

Ve276nVk276q series

Table of Contents