Comunello CU-230V-1M Installation And User Manual

Comunello CU-230V-1M Installation And User Manual

Hide thumbs Also See for CU-230V-1M:

Advertisement

INSTALLATION AND USER'S MANUAL
CU - 230V - 1M
EC DECLARATION OF CONFORMITY:
The undersigned Mr. Luca Comunello, representing the following manufacturer,
Fratelli COMUNELLO Spa
Via Cassola 64, 36027 Rosà (VI) – Italy
DECLARES that the equipment described below:
Description:
Electronic control unit
Code:
GCU00BS1H0G00
Model:
CU 230V 1M
Is in compliance with the provisions set down in the following directives:
2014/53/EU (RED Directive)
and that all the rules and/or technical specifications shown below have been applied:
EN61 000-6-2:2005 + AC:2005
EN61 000-6-3:2007 + A1:2011
EN62233:2008
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1 Final Draft
EN60335-1 :3023 + AC:2014 + A11:2014
and the following amendments.
Rosà (VI) – Italia
12-02-2018
and he also declares that it is not allowed to commission the device until the machinery where it will be incorporated or whose it will
become a component will have been identified and will have been declared in compliance with the conditions of the 2006/42 EC Directive
and with the national legislation that transpose it.
Mr. Luca Comunello
Fratelli Comunello Legal Representative
Fratelli Comunello S.p.A.
Company with certified Quality Management System
UNI EN ISO 9001:2015.
16
COMUNELLO ®Copyright 2019 - All rights reserved
• 2011/65/EU (RoHS Directive)
at trans
n
n
n
ns
pose it.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CU-230V-1M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Comunello CU-230V-1M

  • Page 1 INSTALLATION AND USER’S MANUAL CU - 230V - 1M EC DECLARATION OF CONFORMITY: The undersigned Mr. Luca Comunello, representing the following manufacturer, Fratelli COMUNELLO Spa Via Cassola 64, 36027 Rosà (VI) – Italy DECLARES that the equipment described below: Description:...
  • Page 2 In the manual there are QR-CODEs with the direct link to the You-Tube channel “COMUNELLO TV” where the technical videos of the main functions for the programming of the automation are shared, explained step by step.
  • Page 3 TRIMMER FORCE: It regulates the FORCE of the motor Turning with a screwdriver toward the + increases the Turning with a screwdriver toward the + increases the motor stroke speed during deceleration in 3 STEPS motor power during its normal stroke COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 4: Technical Specifications

    Max TX codes stored in memory: 120 (CODE PP or CODE PED/2°CH) Board dimension: 100 x 105 mm. Fuse 1 : T 6.3A L 250 V (Delayed fuse) Fuse 2: T 100mA L250 V (Delayed fuse) COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 5 BLUE ON COMMON BLACK ON BROWN ON OPEN CLOSED STOP LAMP *capacitor wired between the two phases DO NOT CHANGE THE CONFIGURATION: The automations opens LEFT and closes RIGHT(profile view as in the image) COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 6 Double motor installation (up to 16 m 1 2 3 4 5 LAMP +24V FOTO+ INTERNAL MOTOR 230V 50HZ END STOP OPEN (N.C.) END STOP CLOSE (N.C.) (SALIENT 230V - WITH MAIN BOARD) (SALIENT 230V) COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 7 EAGLE (radial motion, as for CONDOR models). EAGLE (radial motion, as for CONDOR models). ABACUS - CONNECTION ABACUS - CONNECTION EAGLE - CONNECTION EAGLE - CONNECTION BLACK BLACK BLUE BLUE BROWN BROWN * capacitor wired between the two phases COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 8 FORCE / SLAM for electric lock release FORCE trimmer LOCK PREFLASH / PRE-FLASH/ COURTESY LIGHT Pre-flashing function or courtesy 3 sec. of pre-flashing 3 min. activation of the lamp COURTESY LIGHT light TAB.03 COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 9: Electrical Connections

    Note: Input closed by factory; take out the jumper once you connect the button. used to control the gate, operation is as follows: the first command opens the gate until motor time elapses or until the gate COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 10 • Send the selected code with the remote control; • The LED L3 will remain steady on for a second to indicate that programming has been completed; COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 11 Notes: - If you do not want the control unit to perform the deceleration, during programming, at the completion of the opening and closing cycles, press the COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 12: Extended Menu

    If you wish to enable the Courtesy light function repeat the above mention • Press the SET key; programming, by pressing SELECT twice (obtaining fast flashing of LED L7 • LED L3 becomes steady on and programming will be completed. COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 13 The control unit allows the operation of input DS1 to be modified. If you want press the SELECT and SET keys together; this will cause all the RED indicator photocells DS1 operate also during opening (momentary stopping of the gate, COMUNELLO ®Copyright 2019 - All rights reserved...
  • Page 14: Warranty

    Conventional Warranty is 24 (twenty-four) months from the production date, which can be found on the products. The Warranty shall be effective and binding on COMUNELLO only if the product has been correctly installed and maintained in accordance with the installation and safety rules set out in the documentation provided by COMUNELLO or otherwise available on the website http://www.

This manual is also suitable for:

Gcu00bs1h0g00

Table of Contents

Save PDF